The TRACOPOWER TSP series DIN rail battery control module has a universal input voltage of 24VDC and also allows to be used in almost all single and 2-phase power networks. This module provides a professional battery controller to charge and monitor an external lead-acid battery. It is an ultra-compact and Snap-On mount rugged metal case module. Its output current is 15A with an output voltage rating of 24VDC.
Note:
Both the Battery Controller Module and the Buffer Module have an operating temperature of -25 to 70°C with a derating above 40°C of 1.5% / K.
Alarm outputs for input, output and battery condition
Buffer module for power backup
Controlled end of charge voltage by a temperature sensor
Operating temperature ranges between -25°C and 60°C
Overload and short circuit battery protection
Power rating is 360W
Remote ON/OFF for battery and power supply
Ripple factor and noise is 200mV
Shock and vibration proof
Factory automation and process control
Power management
IEC / EN 61204-3
| 属性 | 数值 |
|---|---|
| 交流或直流输入电压 | 直流 |
| 交流或直流输出电压 | 直流 |
| 输入电压 | 24V 直流 |
| 输出电压 | 24V 直流 |
| 输出电流 | 15 A |
| 额定功率 | 360W |
| 输出数目 | 1 |
| 电位相 | 1 |
| 类型 | 电池充电器 |
| 高度 | 110mm |
| 深度 | 110mm |
| 宽度 | 35mm |
| 系列 | TSP |
| 安装类型 | DIN 导轨安装 |
