The Excelsys 240W single enclosed output AC to DC embedded switch mode power supply has an output current rating of 20A at 15VDC. It has a universal input supply voltage rating from 85VAC to 264VAC and 120VDC to 380VDC. The output modules must be inserted into the chassis for the required output voltages up to the total power rating of the selected chassis. The power supply allows the system designers to integrate into a system rapidly. Boasting 90% efficiency in a 1U high package.
Note:
Each modular PSU chassis is supplied with blanking plates.
Plug and play power
User configurable
Efficiency Up to 90%
No minimum load
Voltage adjustment on all outputs
Thermal protection
Over voltage and over current protection
Logic inhibit/enable
Power fail signals
Operating temperature ranges between -20°C and 70°C (derating above 50°C is 2.5% per °C)
Series/ parallel of multiple outputs
Visual LED indicators
Industrial machines
Test and measurement
Automation equipment
Telecommunications
Medical equipment
Laboratory and diagnostic equipment
Audio and broadcast
Linear and rotary motion
EN 60950
UL 60950
UL approved
CSA approved
EN61000-3-2 (power factor corrected)
EN55022-B (EMC)
| 属性 | 数值 |
|---|---|
| 输出电压 | 15 V 直流 |
| 输出电流 | 20A |
| 额定功率 | 240W |
| 输出数目 | 1 |
| 输入电压 | 85 → 264 V ac, 120 → 380 V dc |
| 安装类型 | 底盘安装 |
| 封装类型 | 封闭 |
| 长度 | 269.75mm |
| 宽度 | 127mm |
| 深度 | 40.4mm |
| 重量 | 100g |
| 效能 | 90% |
| 最高温度 | +70°C |
