The Cosel PBA series 150W single output AC to DC embedded switch-mode power supply has an output current of 16.7A at 9VDC. This device is 35% to 65% smaller in volume than the conventional products of the same type. It has a universal input supply voltage rating ranging from 85VAC to 264VAC/120VDC to 370VDC.
Note:
All models include a ventilated cover
Carry out the necessary testing on the end equipment with the power supply installed as per required EMC/EMI regulations
Lightweight and incredibly compact
Overcurrent and overvoltage protection
Harmonic attenuator
Convection cooled
Increased efficiency due to synchronous rectification technology
They also feature remote ON/OFF
Fan alarm
Remote sensing among other functions
Enclosed package type
Chassis mount
Automated machinery
Semiconductor equipment
UL60950-1 (at only AC input)
C-UL (CSA60950-1)
EN60950-1
EN50178 complies with DEN-AN
Complies with FCC Part15 class B (conducted noise)
VCCI-B
CISPR22-B
EN55011-B
EN55022-B (additional EMI/EMC filter required to meet class B for PBA1500F models)
Harmonic attenuator complies with IEC61000-3-2 (PBA10F, 15F and 30F models - not built into active filter)
属性 | 数值 |
---|---|
输出电压 | 9 V 直流 |
输出电流 | 16.7A |
额定功率 | 150W |
输出数目 | 1 |
输入电压 | 85 → 264 V ac, 120 → 370 V dc |
安装类型 | 底盘安装 |
封装类型 | 封闭 |
长度 | 181.5mm |
宽度 | 37.5mm |
深度 | 93.5mm |
重量 | 560g |
效能 | 82 %, 85 % |
最高温度 | +71°C |