Applications: HVAC Refrigeration Controls, Off Road Vehicle Engine Control,

　　Compressors, Hydraulics, Energy and Water Management

　　Industries: Engine and Vehicle, General Industry
Description: The M7100 industrial pressure transducer from the Microfused™ line of MEAS sets a new price performance standard for demanding engine and vehicle industrial applications. This transducer is suitable for measurement of liquid or gas pressure, even for difficult media such as contaminated water, steam and corrosive fluids. The transducer pressure cavity is machined from a solid piece of 17-4 PH stainless steel. The standard version includes a 1/4 NPT pipe thread allowing a leak-proof, all metal sealed system. There are no O-rings or organics exposed to the pressure media and the durability is excellent. This automotive grade pressure transducer with stainless steel hermetic pressure ports and integral electrical connector boasts up to 43,000psi (3000Bar). The M7100 exceeds the latest industrial CE requirements including surge protection and is overvoltage protected to 16Vdc in both positive and reverse polarity.

　　Features:

　　Hermetic Pressure Ports
　　Integral Electrical Connector
　　Survives High Vibration
　　0.25% Accuracy
　　Water Resistant 1M Immersion

　　典型应用: HVAC/R控制，工程机械，发动机控制，压缩机，液压系统，能源和水资源控制

　　行业: 发动机和机动车辆, 工业控制

　　产品描述: M7100工业级压力传感器为要求严格的发动机和机动车辆应用树立了新的性能价格比典范。产品采用MEAS专利的微熔技术，适合液体和气体压力测量，甚至包括污水，蒸汽和腐蚀性液体等介质。 M7100的压力腔由17-4PH不锈钢单件一体式结构加工而成，标准产品带有1/4 NPT压力接口，全金属密封，无泄漏。由于无O型圈、无焊缝、并且不直接接触测量介质，传感器的稳定性和耐用性非常好。汽车级的压力变送器集成密封压力端口和电气接头，最大量程可达43,000psi（3000bar）。传感器符合最新的重工业CE标准，包括浪涌保护，和16Vdc的正向和反向过电压保护。

　　特点:
　　
　　密封压力端口
　　集成的电气接头
　　适合高振动环境
　　精度：0.25%
　　1m 防水

　　M7100压力传感器更多技术参数及规格书下载请浏览：http://www.sensorway.cn/sensors/690.html
　　
　　北京赛斯维测控技术有限公司产品咨询热线：010-84775646，84775648。