Applications: Theatrical Rigging Loads, Assembly Forces, Weighing, Tool Forces, Thrust Measurements, Batch Weighing, Robotics End Effectors, Product Validation Testing, Material Test, Hoist and Winch Loads

　　Industries: General Industry

　　Description: The ELAF series compression and tension load cells raise the bar for high performance at low cost. Measurement Specialties proprietary Microfused® technology, derived from demanding aerospace applications, employs micro-machined piezoresistive strain gages fused with high temperature glass to a high performance stainless steel force measuring flexure. Microfused® technology eliminates age-sensitive organic epoxies used in traditional load cell designs providing excellent long term span and zero stability. Operating at very low strains, Microfused® technology utilizes strain gages providing gage factors greater than 100, an essentially unlimited cycle life expectancy, superior resolution, exceedingly high over-range capabilities (without the need for stops) and an amplified ratiometric high level 0.5 to 4.5 V output or 20 mV/V bridge output. Microfused® sensors are ideal for your test and measurement applications. From the ultra compact 0.5” diameter B0 and T1 design to the high range 1.25” diameter B2 package, the ELAF provides exceptional flexibility and superior performance. Measurement Specialties’ ELAF Test and Measurement series sensors, unlike most designs, are provided with a "four-bar" design where a flexible diaphragm parallels the measuring flexure. This configuration is far less susceptible to off-axis load components than single diaphragm traditional designs. Shielded, FEP/PTFE insulated instrumentation cabling is provided along with spring steel strain reliefs and full NIST traceable calibration certificates. The ELAF unit is fully thermally compensated and can be configured with a variety of options to fine tune the instrument to your application: select from several standard package geometries. Compensated temperature ranges, input voltages, lead lengths or specify entirely unique combinations of these options.

　　Features:

　　Compact design: 12.7mm, 15.88mm and 31.75mm diameter [0.5”, 0.625” and 1.25”]
　　Compression/tension ranges: from 50 - 10KN [10 - 2000lbf]
　　Stainless Steel Body
　　Amplified or mV output
　　Temperature compensated
　　High stability
　　Industry standard packaging
　　Resists off axis load components
　　Full NIST traceable 11 point calibration
　　Shielded FEP/PTFE cabling with strain relief
　　Variety of options available
　　Low cost
　　High reliability
　　Low deflection
　　Robust: high over range
　　Low off-axis response


　　典型应用: 绳索负载，组装力，称重，推力测量，批量称重，机器人末梢执行器，产品验证测试，材料测试，起重机和绞车负载

　　行业: 工业控制

　　产品描述: ELAF系列拉压力传感器具有高性能，低成本的特点。源于航天航空业的特殊要求，MEAS利用独有的微熔技术通过高温熔解玻璃将微机械压阻应变片粘合，制造出高性能的不锈钢力传感器。微熔技术彻底摆脱了传统称重传感器所使用的限制产品寿命的有机环氧树脂，从而具有极好的长期稳定性。在形变非常小的情况下，微熔技术利用应变因子大于100的应变片，产品不存在寿命限制，分辨率高，抗过载能力强，0.5 ~ 4.5 V放大输出，或 20 mV/V 电桥输出。微熔力传感器是您测试测量应用的理想选择。从直径为0.5” 的超小B0型到1.25” 的B2型，ELAF选择灵活，性能卓越。MEAS的ELAF系列测试测量专用传感器采用特殊的“四连杆”设计，用柔性膜片测量形变。不像传统的单膜片设计，ELAF受非轴向负载影响极小。产品配有屏蔽绝缘线缆，传感器和电缆连接处弹簧保护，NIST可追溯。ELAF产品经过温度补偿，使用寿命长。客户可根据应用配置最适合的ELAF：可选的尺寸，温度补偿范围，工作电压，输出电缆长度。

　　特点:

　　尺寸小：直径12.7mm，15.88mm和31.75mm [0.5”, 0.625”, 1.25”]
　　拉/压力量程：50-10KN [10 ~ 2000 lbf ]
　　不锈钢外壳
　　放大或mV输出
　　温度补偿
　　工业标准封装
　　非轴向负载影响低
　　11点校正，NIST溯源认证
　　FEP/PTFE屏蔽电缆，连接处弹簧保护
　　多种型号可选
　　低成本
　　可靠性高
　　耐用：高过载能力
　　偏差小

　　 ELAF系列拉压力传感器更多技术参数及规格书下载请浏览：http://www.sensorway.cn/sensors/124.html
　　
　　北京赛斯维测控技术有限公司产品咨询热线：010-84775646，84775648。