发布日期:2022-10-09 点击率:41 品牌:AST
博勒飞Brookfield粘度计美国ASTM标准目录 | |
标准号 | 标准名 |
ASTM C 965-1996 | 软化点以上的玻璃粘度的测定的标准实施规程 Practice for Measuring Viscosity of Glass Above the Softening Point |
ASTM C 1276-1994 | 利用旋转粘度计测量模制粉末熔点以上粘度的标准试验方法 Standard Test Method for Measuring the Viscosity of Mold Powders Above their Melting Point Using a Rotaional Viscometer |
ASTM D 115-2002 | 电绝缘用清漆的试验方法 Methods of Testing Varnishes Used for electrical Insulation |
ASTM D 562-2001 | 斯托默粘度计测定涂料稠度的试验方法 Standard Test Method for Consistency of Paints Using for Stormer Viscometer |
ASTM D 789-1998 | 测定聚酰胺的相对粘度、融点和含湿量的试验方法 Test Methods for determination of Relative Viscosity, Melting Point, and Moisture Content of Polyamide(PA) |
ASTM D 1076-1988 | 橡胶.浓缩的、氨储存的、乳状的和离心处理的天然胶乳的标准规范 specification for Rubber-Concentrated, Ammonia Preserved,Creamed and Centrifuged NatuRAL latex |
ASTM D 1084-1997 | 胶粘剂粘度的测试方法 Test Methods for Viscosity of adhesives |
ASTM D 1417-2003 | 合成橡胶胶乳的试验方法 Methods of Testing Rubber Latices-Synthetic |
ASTM D 1439-2003 | 羧甲基纤维素钠盐的试验方法 Methods of Testing Sodium Carboxymethyl-Cellulose |
ASTM D 1824-1995 | 在低剪切速率下塑料溶胶和有机溶胶的表观粘度的标准测试方法 Test Method For Apparent Viscosity of Plastisols and Organosols at Low Shear Rates by Brookfield Viscometer |
ASTM D 2196-1999 | 旋转(Brookfield)粘度计测定非牛顿材料流变性能的试验方法 Test Methods for Rehological Properties on Non-Newtonian Materials by Rotational(Brookfield) Viscometer |
ASTM D 2364-2001 | 羟基乙基纤维素的标准试验方法 Standard Methods of Testing Hydroxyethyl-Cellulose |
ASTM D 2393-1986 | 环氧树脂和相关成分粘度的试验方法 Test Method For Viscosity of Epoxy Resins and Related Components |
ASTM D 2556-1993 | 用切变速率决定其流动性能的胶粘剂的表观粘度的标准试验方法 Test Method For Apparent Viscosity of Adhesives Having Shear Rate Dependent Flow Properties |
ASTM D 2983-2004 | 用Brookfield粘度计测量润滑剂低温粘度的标准试验方法 Test Method for Low-Temperature Visosity of Automotive Fluid Lubricants Measured by the Brookfield Viscometer |
ASTM D 3236-1988 | 热熔粘合剂及涂层材料表观粘度的标准试验方法 Test Method for Apparent Viscosity of Hot Melt Adhesives and Coating Materials |
ASTM D 3468-1999 | 屋面和防水用液体氯丁橡胶及氯磺化聚乙烯标准规范 Standard Specification for Liquid-Applied Neoprene and Chlorosulfonated Polyethylene Used in Roofing and Waterproofing |
ASTM D 3716-1999 | 地板抛光剂用乳化聚合物的标准试验方法 Method of testing Emulsion Polymer for Use in Floor Polishes |
ASTM D 3791-2004 | 评价热对沥青影响的标准实施规程 Standard Practice for evaluating the Effects of Heat on Asphalts |
ASTM D 4016-2002 | 用Brookfield粘度计测定化学灌浆粘度的标准试验方法(实验室法) Test Method For Viscosity of Chemical Grouts by the Brookfield Viscometer(Laboratory Method) |
ASTM D 4287-2000 | 用锥板粘度计测定高速剪切粘度的标准试验方法 Standard Test Method for High-Shear Viscosity Using the ICI Cone/Plate Viscometer |
ASTM D 4300-2001 | 霉菌污染对胶粘制剂及胶粘膜的耐久性影响的测试方法 Test Method for Effect of Mold Contamination on Permanence of Adhesive Preparations and Adhesives Films |
ASTM D 4402-2002 | 使用Brookfield Thermosel仪器测定非填充沥青粘度的试验方法 Standard Methods for Viscositu Determinationgs of Unfilled Asphalts Using the Brookfield Thermoesel Apparatus |
ASTM D 4889-2004 | 聚氨基甲酸乙酯原材料的标准试验方法:异氰酸酯或改性异氰酸酯粘度测定 Standard Test Method for Polyurethane Raw Materials:Determination of Viscosity of Crude or Modified Isocyanates |
ASTM D 5018-1989 | 煤焦油和石油硬沥青剪切粘度的试验方法 Standard Test Method for Shear viscosity of Coal-Tar and Petroleum Pitches |
ASTM D 5133-2005 | 温度扫描技术测试润滑油的低温、低剪切率、粘性/温度依赖性的标准试验方法 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique |
ASTM D 6080-1997 | 液压流体粘滞特性定义的标准操作 Standard Practice for Defining the Viscosity Characteristics of Hydraulic Fluids |
下一篇: PLC、DCS、FCS三大控
上一篇: 索尔维全系列Solef?PV